Temperature and humidity chamber

HC40-Temperature and humidity controlled chamber

Two door laboratory incubator, temperature and humidity controlled chamber

Fuji Controller spec.sheet.pdf
Watlow controller App Spec.Sheet pdf

HC40- Temperature and humidity controlled chamber

This is a two door laboratory incubator, temperature and humidity controlled chamber capable of performing in wide temperature range(2°c to 50°c) with precise temperature control over the entire range. The temperature and humidity controlled chamber can be used in wide range of application and in wide range of testing, growth industries, research facilities, laboratories etc.

Chamber features all stainless steel interior and exterior construction with 2″ polyurethane CFC free insulation.

Cabinet standard features

  • Stainless Steel Exterior & Interior
  • Maintains temperatures between 2°c to 50°c
  • Recessed Door Handle
  • Door locks standard
  • Magnetic door gasket standard for positive door seal
  • Pre-Installed 4″casters with bumper brakes
  • Three (3) Pre-Installed shelves per section-6 total.
  • Back wall plenum for even distribution of conditioned air

The temperature and humidity controlled Chamber uses thermoelectric assembly for heating and cooling. This type of cooling/heating system completely eliminates need for conventional refrigeration system and failures due to mechanical components such as compressors thereby drastically increasing the life expectancy of each chamber. Maintenance cost is also lowered by the thermoelectric/Peltier driven heating/cooling system. The chamber is quiet  while in operation.Chamber temperature set points are tightly controlled using PID controller, calibrated 3 wire RTD Sensor. Chamber utilizes ultrasonic humidifier for humidification, an optional desiccant dehumidifier, %RH sensor and a PID controller to maintain humidity set points.

Standard Temperature control features:

  • Control/ Alarm notification via App (Watlow controller)

  • Simplifies Controller Management with Easy-to-Operate Graphic User Interface,LED display, Autotune capability

  • Provides Access to Advanced Scripting Capabilities

  • Save Controller Parameters

  • Access Stored Parameters

  • Log Controller Data

  • Control access, alarm notification via app ( Watlow model)

  • 2 programmable alarm

  • IP-65 Panel (front panel splash proof)

  • CRC protocol correction build in for error free communication

  • Visually interpret thermal data

  • Set multiple target temperatures and program steps for advanced applications like thermal cycling

  • Save and load script parameters from stored files on your disk drive

  • Multiple jumps and loops function for complex testing profile

  • *Note: We offer 2 controller models- Not all features may be available in one controller- Please refer to controller spec.sheet

Humidity control features:

    •  3% accuracy over the entire input range

    • Displays both the set point and actual relative humidity

    • On/off controller is  standard. if you need PID controller with tighter control up to 1% RH- please contact us.

    • A fast response, capacitive relative humidity sensor is included. It has high accuracy, high reliability, consistency

    • Dual alarm outputs with 10+ activation methods/situation

    • High brightness, large LED display – easily read from distance.

Temperature range

2°C to 50°C (Extended temp up to 70°C available)

Temperature uniformity

± 0.7°C

Temperature control at sensor


Humidity Range(optional)

50% to 90% at operating temperatures of 15°c to 28°c

Cooling/Heating type

Thermoelectric/Peltier driven-for heating/Cooling

Chamber Volume in Cu. Ft

43.2 cu.ft

External Dimension-LXWXH

51″×31″×81″ (refer to drawing)

Internal Dimension-LXWXH

47″ x 27″ x 60″(refer to drawing)- height includes plenum which is 5″H.

Cabinet specs

Stainless interior and exterior construction



Electrical requirement

115V/60hz/1ph, Unit plugs into standard wall outlet.

Shelf quantity, type

6 per chamber/ additional shelves available, wire shelf- PVC coated 

Weight specs

Chamber weight-340 Llbs

Shipping weight- 390 Lbs


Note: Final finished product(chambers) may vary due to different options than what is shown in pictures. Canden products company reserves right to make changes without notice.